8.13. Remove the SS3-Board
1. Remove the Tuner unit. (See section 8.5.)
2. Disconnect the bridge connector (SS03-SS22) and dis-
connect the flexible cables (SS57 and SS59).
3. Remove the screws (×4
8.14. Remove the SS-Board
1. Remove the Tuner unit. (See section 8.5.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connector (SS11).
4. Disconnect the flexible cables (SS33, SS53, SS55 and
SS56).
5. Disconnect the bridge connectors (SS02-SS24 and
SS03-SS22).
6. Remove the screws (×7
) and remove the SS3-Board.
) and remove the SS-Board.
8.15. Remove the Support metal
1. Remove the screws (×2
2. Remove the Support metal.
25
, ×2
).