Canon ZR500 Instruction Manual page 77

Playback
Problem
Pressing the playback button
does not start playback.
Tape is running, but image will
not appear on the TV screen.
No sound from the built-in
speaker.
Cause
Camcorder is turned off, or is
not set to
(PLAY·@2J)
mode.
Cassette is not loaded.
Tape reached the end
(" [@
END"
flashes on the
screen).
TV/VIDEO selector on the TV
is not set to VIDEO.
Video heads are dirty.
You attempted to play back or
dub copyright protected tape.
Speaker volume is turned off.
Solution
Set the camcorder to
(PLAt'@2J)
mode.
Load a cassette.
Rewind the tape.
Set the selector to VIDEO.
Clean the video heads.
Stop playback/dubbing.
Adjust the volume with the
[SPEAKER VOLUME] option.
co
27
15
27
30
71
29
-
77