Advertisement
Overview
Introduction
Thank You for purchasing this Acurite
manual in itʼs entirety to fully enjoy the benefits and features of this
product. Please keep this manual for future reference.
NOTE: A protective film is applied to the LCD at the factory that must be
removed prior to using this product. Locate the tab and simply peel to
remove.
Outdoor
Temperature
Outdoor Relative
Humidity
Indoor Temperature
SETUP
Battery Choice & Temperature Range
Extended periods of cold temperatures ( below -4ºF / -20ºC ) can cause
alkaline batteries to function improperly. This will cause the outdoor
wireless sensor to stop transmitting temperature readings. Use lithium
batteries in these low temperature conditions to ensure continued
operation for wireless sensors placed outdoors. NOTE: Rechargeable
batteries are not recommended due to higher operating voltages.
product. Please read through this
®
Outdoor Temp.
Trend Indicator
Wireless Signal
Reception Indicator
Indoor Relative
Humidity
1
SETUP
Main Unit Detachable Stand
Included with the main unit is a detachable stand for table top placement.
Remove
Installing Batteries - Wireless Sensor
Remove the battery
compartment cover. Install
2 fresh "AA" batteries as
shown here.
BATTERIES
MUST BE INSTALLED FOR
THE SENSOR TO OPERATE
Installing Batteries - Display Unit
Remove the stand and
battery compartment
cover.
Install 2 fresh "AA"
batteries into the
battery compartment.
Replace the battery
compartment cover.
Attach
A
2
B
Advertisement
