Table of Contents
Advertisement
Contrast
With the rearview camera switched on:
1.
Select the symbol.
2.
Turn the controller until the desired setting
is reached, and press the controller.
System limits
Detection of objects
High, protruding objects such as ledges may
not be detected by the rearview camera.
The objects displayed in the Control Display
under certain circumstances are closer than
they appear. Therefore, do not estimate the
distance from the objects on the display.
Top View
The concept
Top View assists you in parking and maneu‐
vering. The area around the vehicle is shown
on the Control Display.
General information
The image is captured by two cameras
integrated in the exterior mirrors, by the rear‐
view camera and a camera on the front of the
vehicle.
The range is no more than approx. 10 ft/3 m to
the side, front and rear.
Obstacles within this range are thus displayed
early on the Control Display.
Notes
Check the traffic situation as well
Check the traffic situation around the ve‐
hicle with your own eyes. Otherwise, an acci‐
dent could result from road users or objects lo‐
cated outside the picture area of the
cameras.◀
Online Edition for Part no. 01 40 2 910 949 - VII/13
Driving comfort
At a glance
Button in the vehicle
Top View
Cameras
The lenses of the Top View cameras are lo‐
cated at the bottom of the exterior mirror hous‐
ings. The image quality may be impaired by
dirt.
Clean the lens, refer to page 238.
Functional requirements
Top View can be used only to a limited extent
in the following situations:
▷
With a door open.
▷
With the tailgate open.
▷
With an exterior mirror folded in.
▷
In poor light.
The unavailable camera range is depicted with
cross-hatching.
Controls
151
Advertisement
Table of Contents
