Operation; Specifications - Sony DVW-A500 Operation Manual

Specifications

1. OPERATION

General
A-2
Appendixes
Power requirements
Power consumption
Peak inrush current
(1) Power ON, current probe method: 25A (100V), 36A (240V)
(2) Hot switching inrush current, measured in accordance with
Operating temperature
Storage temperature
Humidity
Mass
Dimensions
Recording format
Tape speed
Digital record/playback time
Analog Betacam playback time
Fast forward/rewind time
Search speed
Dynamic Tracking range
Servo lock time
Load/unload time
Recommended tapes
100 to 240 VAC ±10 %, 50/60 Hz
DVW-A500/A500P: 540 VA (240W)
DVW-500/500P: 480 VA (220W)
European standard EN55103-1: 10A
(230V)
+5°C to +40°C (+41°F to +104°F)
–20°C to +60°C (–4°F to +140°F)
25 to 80% (relative humidity)
DVW-A500/A500P: 35 kg (77 lb)
DVW-500/500P: 33 kg (73 lb)
427 × 237 × 520 mm (w/h/d)
× 9 × 20
(16 3 / 3 / 1 / inches)
4 8 2
Digital Betacam
Digital Betacam: 96.7 mm/s
Betacam playback:
118.6 mm/s (DVW-A500)
101.5 mm/s (DVW-A500P)
124 minutes with BCT-D124L
DVW-A500: 90 minutes with BCT-
90ML cassette
A
DVW-A500P: 100 minutes with BCT-
90ML cassette
A
Approx. 3 minutes with BCT-D124L
Shuttle mode:
Digital Betacam: Still to approx. ±50
times normal playback speed
Betacam playback:
Still to ±35 (for DVW-A500)
Still to ±42 (for DVW-A500P)
Variable mode:
–1 to +3 times normal playback speed
Jog mode:
0 to ±1 or ±3 times normal playback
speed (selectable in setup menu)
–1 to +3 times normal playback speed
0.5 seconds or less (from standby on)
6 seconds or less
Digital Betacam cassette (S, L)
BCT-D6/D12/D22/D32/D40/D34L/
D64L/D94L/D124L or equivalent
Betacam/Betacam SP cassette (S, L)
for playback with DVW-A500/A500P