Page 1
® GAS-FIRED INFRARED OUTDOOR SPACE HEATER USER’S INSTALLATION, OPERATION AND MAINTENANCE MANUAL MODEL : KPH120 (PROPANE, 11,000 BTU/HR) FOR YOUR SAFETY FOR YOUR SAFETY If you smell gas : Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any 1.
Page 2
TABLE OF CONTENTS PAGE NO. General Safety Instructions Heater Assembly Instructions Self Contained Propane Systems Gas Supply Connection Locating Your Heater Clearance to Combustibles Lighting Shutdown & Storage Instructions Maintenance Main Burner Removal & Installation Test Firing Heater Alternate Gas Supply Systems Troubleshooting Parts List Warranty Information...
IMPORTANT SAFETY PRECAUTIONS : • Any cleaning agent used on the heater should be of a non-corrosive and non-combustible type. • Children and adults should be alert to high surface tem- perature around the burner assembly and heat reflector • The stainless steel emitter screen and gas valve normal- when operating this heater.
Page 4
SPECIFICATIONS HOW TO ASSEMBLE 22” STEP #4 STEP #1 STEP #2 36” STEP #5 STEP #3 13.9” MODEL NO. KPH120 RATING 11,000 BTU/hr PROPANE MIN INLET SUPPLY PRESSURE 11” WC MANIFOLD PRESSURE 10.7” WC SIZE 21.8” x 36” WEIGHT 7.5 lbs. (3.4 kg)
CYLINDER ATTACHMENT TO CYLINDER REMOVAL : HEATER : • Lift and rotate propane cylinder as shown in Fig. 6. Disconnect cylinder by turning it counter clockwise. • Turn gas control knob clockwise to “ OFF” • Remove base assembly door as show in Fig. 1. Lift and rotate gas pressure regulator outwards as show in Fig.
5. Keep the control knob depressed for at least 30 SAFETY : seconds after lighting burner. After 30 seconds release BEWARE control knob. 6. If burner does not stay lit, repeat steps 4 & 5. OF SPIDERS! 7. When burner is lit, turn gas control knob counterclock- wise to desired setting.
Page 7
BURNER A S S E M B LY R E M O VA L : TEST FIRING HEATER : • Remove reflector and emitter screen as an assembly by Test fire your patio heater, following the lighting instruc- removing the screws that fasten the emitter screen to the tions applicable to the gas control system employed.
TROUBLESHOOTING Problem Possible Cause What To Do Burner won’t light • Control knob not in IGN/ON position • Turn control knob to IGN/ON position • Control knob not pressed in while • Press in control knob while in IGN/ON in IGN/ON position position •...
Page 9
PARTS LIST DESCRIPTION PART NO. QTY. Reflector 2PHP001 1 EA Cap Nut 3 EA Flat Washer 6 EA Flat Washer 6 EA Hexa Nut 3 EA Hexa Bolt 3 EA Emitter Ass’y 2PHZ002 1 EA Burner Ass’y 2PHZ004 1 EA Thermocouple 3DSA002 1 EA...
LIMITED WARRANTY This limited warranty is extended to the original retail purchaser of this heater and warrants against any defect in materials and workmanship for a period of 1 year from the date of retail sale. World Marketing of America, Inc., at it’s option will either provide replacement parts, replace or repair the unit, when properly returned to us.
Need help?
Do you have a question about the KPH120 and is the answer not in the manual?
Questions and answers