1. 4. Serial Number Setup
1. 4. 1. Required equipments
1. PC : Use it as adjustment use.
2. Communication cable : D-sub 9pin (male/emale RS-232C straight)
3. Software : [Service ORCA11.exe]Adjustment software is downloaded from the projector service homepage.
1. 4. 2. Preparation
1. Connect the RS-232C termanal of projector
and PC with a RS-232C cable.
1. 4. 3. Setting method
1. Switch the projector to "Standby" mode (POWER indicator is Lighting in red).
2. Start up service software [Service ORCA11.exe] with a computer.
3. Select language and click the [ OK ] button.
4. 1) Select the Serial Port of the computer.
2) Select a model number.
(Case of AT6000, select the AE8000.)
3) Click the [ Data ] button.
5. Click the [ Set up ] button of Serial Number.
6. Input the product serial number, and click the [ Send ] button.
Computer
RS-232C cable (Streight)
①
③
ADJ - 5
Projector
②