Assembly Instructions; Exploded Diagram - Impex POWERHOUSE JD 1 Owner's Manual

Impex owner's manual powerhouse slant board jd 1

ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen

Wrenches

NOTE: It is strongly recommended two or more people assembling this machine to

avoid possible injury.

STEP 1

(See Exploded Diagram)

A.) Attach the Main Frame (#1) to the bracket on the Front Incline Support (#2). Secure it with

one M10 x 2 3/8" Carriage Bolt (#11), Ø ¾" Washer (#13), and M10 Aircraft Nut (#15).

B.) Slide the Front Incline Support (#2) onto the Front Stabilizer (#3). Use a Lock Knob (#16)

and the Lower Foam Tube (#5) to secure the Front Incline Support at desired incline

position.

C.) Insert the Foam Tube (#4) halfway through the hole on the Front Incline Support. Push

four Foam Rolls (#10) onto the Foam Tube and the Lower Foam Tube on the Front Incline

Support from both ends.

D.) Place the Upholstery Board (#17) onto the Main Frame (#1). Secure it with four M6 x ¾"

Allen Bolts (#12) and

½" Washers (#14).

Table of Contents