22
SuperSign Elite-c
To use the RS232 port connection, select RS232C and change the settings as shown below.
Item
COM Port
Baud rate
Data bits
Parity
Stop bits
Time Out
To use the network connection, select RJ45 and change the settings as shown below.
Click the Ping Test button to check whether the connection succeeds or fails.
Use the Time Out option to set the time to wait for command reception. The default is 2 seconds.
Communication port setting
Communication speed setting, default: 9600
Communication data setting, default: 8
Parity check setting, default: None
Stop bit count setting, default: 1
Time to wait for command reception, default: 2 seconds
Description