Wireless Remote Battery Replacement Procedure - Jacuzzi J - 315 Owner's Manual

17.3

wireless remote Battery replacement procedure

1. Turn the remote unit over and locate the battery
door (Figure A).
2. Rotate the battery door, with a coin, counterclockwise
until the dot aligns with the Open arrow (Figure B).
3. Remove battery door using coin to pry the door upward
(Figure C).
4. Replace battery using CR2430 or equivalent (Figure
D).
5. Reinstall the battery cover, using the coin to close
(Figure E).
note: Remote unit is water resistant not waterproof,
therefore the unit should be stored in a dry location within your home and
never be left in the spa while the cover is on and spa is not in use.
J-300 series
J-300 Series
Fig. A
CLOSED
OPEN
Battery
Door
CLOSED
OPEN
Fig. B
CLOSED
OPEN
Fig. C
CLOSED
OPEN
LITHIUM
BATTERY
CR2430
3V
Fig. D
CLOSED
OPEN
Fig. E
55 55