Changing Harness Strap Slots - Century SmartMove Instruction Manual

OPERATIONS and ADJUSTMENTS
7

Changing Harness Strap Slots:

A Loosen harness straps:
Pull and hold upper belt tab.
Pull harness straps out.
B Remove both harness strap loops from
Splitter Plate on back of car seat.
C Change harness strap slots.
Make sure harness straps are threaded
through matching slot of seat pad and
car seat.
It may be necessary to remove seat pad
from top of car seat.
14
(continued)
D Re-attach harness strap loops to Splitter
Plate (fig. e):
• For Infants or Small Toddlers:
Put Top right strap loop on Splitter
Plate first, then attach Top left strap
loop.
NOTE: Make sure ends of straps are
behind Splitter Plate.
• For Toddlers:
Put Bottom right strap loop on Splitter
Plate first, then attach Bottom left strap
loop.
NOTE:
• Make sure both strap loops are securely
attached within Splitter Plate hook.
• Make sure straps are NOT twisted and
are routed between adjuster lever and
car seat shell (fig. f).