Changing Harness Strap Slots - Century STE Instruction Manual

CHANGING HARNESS STRAP SLOTS

Use proper harness slots
• Rear-facing - Use bottom or middle slots which are
at or just below child's shoulders.
• Forward-facing - Must use top slots only.
1
Loosen harness straps:
• Lift adjuster lever (A) to
release harness straps.
• Pull harness straps (B) .
2
Remove harness strap loops
from Splitter Plate.
3
Pull harness straps out of
current slots and thread through
desired slots.
NOTE: For ease of threading
harness straps, remove seat pad
from back of car seat.
Make sure harness straps are threaded through
matching slot of seat pad and car seat.
4
Re-attach harness strap to
Splitter Plate:
• Slide each harness strap loop
onto Splitter Plate. Straps
must not be twisted.
5
Make sure Splitter Plate Strap
passes between recline stand
and car seat shell (see arrow).
NOTE: Splitter Plate Strap must
not be twisted.
6
Re-attach seat pad.
18
Splitter Plate
Splitter Plate Strap
(B)
(A)