Quickstart - Whites TDI SL Owner's Manual

1. Set the
Conductivity
2. Set the
Frequency
3. Set the
Ground Balance
4. Turn on the power and adjust the
5. Adjust the
6. With the coil on the ground (no motion) increase the
until the audio begins to chatter. Back off slightly for a rea-
sonably smooth threshold.
7. Optional: adjust the
amount of chatter.
8. Using a spot free of targets, bob the coil up & down and
adjust the
response.
9. For most nugget hunting, set the
.
LOW
TDI SL
Owner's Manual

QuickStart

switch to
offset to the midpoint.
to ~8.
to achieve a faint background hum.
Threshold
Frequency
Ground Balance
.
ALL
Gain
offset to minimize the
control to minimize the audio
Conductivity
Page 6
to "2."
switch to
Gain