Advertisement
Turbo Fan model 3077
The turbo fan is used to boost
the airflow around the room.
To circulate the heat around
the room to reach the desired
temperature more quickly, set
the neon heat selector switches
to ON, and the Turbo switch
to ON.
The fan and the neon switch
will cycle on and off under
the control of the thermostat
– see 'Thermostat'.
In warm weather, the fan can
be used to circulate cool air.
Set the two neon switches to OFF,
Fig. 10 Turbo Model
and the turbo switch to 'ON', then
turn the thermostat knob fully clockwise to maximum setting
Safety – overheat protection
For your safety, this appliance is fitted with a thermal cut-out. In the event
that the product overheats, the cut-out switches the heater off
automatically.
To bring the heater back into operation, remove the cause of the
overheating, then unplug or turn off the electrical supply to the heater for a
few minutes.
When the heater has cooled sufficiently, re-connect and switch on the
heater.
Important Notes
Although this heater is manufactured to comply with the relevant safety
standards, certain types of carpets could become discoloured by the
temperatures under a portable heater. If you are concerned about this, we
recommend that you contact the carpet manufacturer for guidance.
Alternatively, either stand the heater on a suitable base to shield the
carpet or wall-mount it – call our Helpline for further advice.
You may notice some parts of the element appearing to be hotter from
time to time because of the variable airflow through the heater. This does
not cause a safety hazard.
The heat outlet grille may become discoloured with use – this is caused by
airborne pollution and is not a fault.
Advertisement
