Lens Disassembly Procedure - Panasonic Lumix DMC-FZ150P Service Manual

8.4.

Lens Disassembly Procedure

Precaution:
1. Do not remove the MOS SENSOR unit when disassem-
bling or re-assembling the lens in order to maintain it
clean.
The screws for fixing the MOS SENSOR unit to the mas-
ter flange unit are locked by glue with the adjustment of
the installation angle of the MOS SENSOR unit to the
lens (optical axis adjustment) finished.
When remove it, refer to item "8.5.".
2. Keep dust or dirt away from the lens.
To remove dirt or dust from the lens, blow with dry air.
3. Do not touch the lens surface.
4. Use lens cleaning KIT (VFK1900BK).
5. Apply grease as shown on item "8.4.5" and "8.4.6" in the
figure.
8.4.1. Removal of the Zoom Motor Unit
1. Remove the 8 solders.
2. Remove the 2 Ribs.
3. Unscrew the 2 screws (A).
4. Remove the zoom motor unit.
8.4.2. Removal of the 1st Lens Frame Unit
and 2nd Lens Frame Unit
1. Unscrew the 1 screw (B).
2. Remove the cam stopper.
34