Technical Specifications; Installation; Water Supply - Electrolux EWT 135410 W User Manual

TECHNICAL SPECIFICATIONS

DIMENSIONS
LINE VOLTAGE /FREQUENCY
POWER CONSUMPTION
WATER PRESSURE
Connection to water supply

INSTALLATION

Remove all protective packaging for transit
before using for the first time. Keep in case
needed for future transit: Transporting a
non-secured appliance may damage inter-
nal components and cause leakages and
malfunctions. The appliance can also be
damaged through physical contact.
UNPACKING
1
2
UNTYING
A B
C
D
2 B
1
Height
Width
Depth
Minimum
Maximum
C
To install your washing machine at the
same level as surrounding furniture, pro-
ceed as shown on picture D.

WATER SUPPLY

Install the supplied water inlet hose at the
rear of your washing machine by proceed-
ing as follows. Do not reuse an old hose.
The water inlet hose can not be extended. If
it is too short, please contact the after-sales
service.
A
Open the water inlet tap. Check there are
1
no leaks.
2
850 mm
400 mm
600 mm
230 V / 50 Hz
2300 W
0,05 MPa (0,5 bar)
0,8 MPa (8 bar)
Type 20/27
1
2
1
90 90 90
O O O
electrolux 11
D