Welltec System Officemate 2D User Manual page 11

Loading the Paper Hopper
It is important that you load the paper hopper correctly to minimize the risk of paper jams
occurring.
Fan the pressure seal forms to separate and to eliminate any static that may have been
caused by the laser printer.
Adjusting the hopper paper guides to the correct location
Too much gap!
Good
Please note.
The hopper will take up to 150
printed forms. However please do
not overload the hopper. This will
result in miss-feeding
Paper Guide Tension
Insure that the side guides are
right up against the edge of the
form but not compressing the
form
- 11 -