Electrical Connection For Great Britain And Ireland Only 1 - IKEA UDDEN HW320 User Manual

ENGLISH
Scrapping of household appliances
• This appliance is manufactured with
recyclable or reusable materials. Dispose
of it in accordance with local waste
disposal regulations. Before scrapping, cut
off the power supply cable.
• For further information on the treatment,
recovery and recycling of household
electrical appliances, contact your
competent local authority, the collection
service for household waste or the store
where you purchased the appliance.
Declaration of conformity
• This appliance is manufactured in
compliance with Regulation (CE) No.
1935/2004.
Electrical connection for Great Britain and Ireland only
Warning - this appliance must be earthed
Fuse replacement
If the mains lead of this appliance is fi tted
with a BS 1363A 13amp fused plug, to
change a fuse in this type of plug use an
A.S.T.A. approved fuse to BS 1362 type and
proceed as follows:
1. Remove the fuse cover (A) and fuse (B).
2. Fit replacement 13A fuse into fuse cover.
3. Refi t both into plug.
Important:
The fuse cover must be refi tted when
changing a fuse and if the fuse cover is lost
the plug must not be used until a correct
replacement is fi tted.
Correct replacement are identifi ed by the
colour insert or the colour embossed in
words on the base of the plug.
Replacement fuse covers are available from
your local electrical store.
For the Republic of Ireland only
The information given in respect of Great
Britain will frequently apply, but a third type
of plug and socket is also used, the 2-pin,
side earth type.
n
• This appliance has been designed,
manufactured and marketed in compliance
with:
- safety objectives of the "Low
Voltage" Directive 2006/95/CE (which
replaces 73/23/CEE and subsequent
amendments);
- the protection requirements of Directive
"EMC" 2004/108/EC.
Electrical safety of the appliance can only
be guaranteed if it is correctly connected to
an approved earthing system.
Socket outlet / plug (valid for both
countries)
If the fi tted plug is not suitable for your
socket outlet, please contact After-sales
Service for further instruction. Please do
not attempt to change plug yourself. This
procedure needs to be carried out by a
qualifi ed technician in compliance with
the manufactures instructions and current
standard safety regulations.
1 1