Ec-Declaration Of Conformity - Jonsered GT2125 Operator's Manual

EC-declaration of conformity

(Applies to Europe only)
Jonsered, SE-561 82 Huskvarna, Sweden, tel: +46 36-146500, declares under sole responsibility that the trimmers Jonsered
GT2125, GC2125 and GC2125C from 2002's serial numbers and onwards (the year is clearly stated in plain text on the type plate
with subsequent serial number), are in conformity with the following standards or other normative documents following the
provisions in the COUNCIL'S DIRECTIVES:
- of June 22, 1998 "relating to machinery" 98/37/EC, annex IIA.
- of May 3, 1989 "relating to electromagnetic compatibility" 89/336/EEC, and applicable supplements.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. Conformity assessment according to Annex V.
For information relating to noise emissions, see the chapter Technical data.
The following standards have been applied: EN292-2, CISPR 12:1997, EN ISO 11806.
SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried out voluntary type approval for
Husqvarna AB. The certificates have the numbers: SEC/01/845, 01/164/028 - GT 2125, SEC/01/846, 01/164/029 - GC 2125, GC
2125C.
Huskvarna February 16, 2005
Bo Andréasson, Managing director
TECHNICAL DATA
– 29
English