Alarm And Sleep; Alarm Operations - Teac CRX350iP Instruction Manual

NOTES ON HANDLING COMPACT DISCS (CDs)
● Do not expose the CD to direct sunlight, high humidity or high temperatures for
extended periods of time.
● CDs should be returned to their cases after using.
● Do not attach label or seal to either side of the CD-R/RW disc. It may cause a
malfunction.
● Handle the CD by its edge. Do not touch the playing surface (glossy side).
● Fingerprints and dust should be carefully wiped off the playing surface of the CD
with a soft cloth. Wipe in a straight motion from the center to the outside of the CD.
● Never use chemicals such as record cleaning sprays, antistatic sprays or fluids,
benzene or thinner to clean CDs.

4. ALARM AND SLEEP

Your CRX350iP provides an Alarm Wakeup function to iPod/Phone, Radio, CD or Alarm.
SETTING ALARM TIME
Note: Alarm time can only be set in "POWER ON" mode after the current time is set.
To set the wakeup time, press and hold the ALARM
1.)
seconds until the hour digit blinks and "AlARM" will light.
2.)
When the hour digit blinks, press the
digit.
Note: For the 12 Hour format, make sure the Hour is set so that AM or PM is correctly
There is a PM Indicator located underneath the Hour digit. The
displayed.
displayed time is PM
when the indicator is lit. The displayed time is AM when the
indicator is off.
Press the ALARM button to save the hour setting, the minute digits will blink.
3.)
4.)
When the minute digits blink, press the
minute digit.
Press the ALARM button to
5.)
SETTING THE WAKEUP MODE
Following step 5 above, press the ALARM button once to enter the wake up
6.)
selection mode, then follow the steps below according to the desired Alarm mode.
Note: "EUNE" stands for Wake to Radio, "Cd" stands for Wake to CD, "IPOd"
stands for Wake to iPod/iPhone and "bUZZ" stands for Wake to Alarm Buzz.
i. Wake to Radio
- Repeatedly press the
"EUNE", appears and blinks on the Display.
Press the ALARM button again to enter the VOLUME setting mode. The Volume
-
Digit will blink on the display.
- Repeatedly press the
appears and blinks on the display then press the ALARM button to complete the
setting.
- Press the STANDBY
when the set Alarm time is reached.

ALARM OPERATIONS

or Buttons to adjust your desired hour
or buttons to adjust your desired
save the
wakeup setting.
or buttons until the "Radio Wakeup" Indicator,
or buttons until the desired Volume level (10-30)
button to turn the CRX350iP off. The Radio will come on
16
Button for approximately 2