Teac CRX350iP Instruction Manual page 11

Press the ENTER/MEMORY/CLOCK ADJUST button once. The preset channel
2.)
number "P - 01" and "MEMORY" will appear with "01" and "MEMORY" flashing on
the display.
To change the preset channel number location, press the FOLDER/PRESET + or
3.)
FOLDER/PRESET - Buttons to scroll through the preset locations (P-01~P-20).
For example the preset channel number P-10 is selected for this station.
To confirm the preset location, press the ENTER/MEMORY/CLOCK ADJUST
4.)
button again. The station at 103.2 MHz is now stored in preset channel number 10.
5.) To store more station presets, repeat steps 1 to 4 for up to 20 stations.
Note: You can overwrite a preset station by storing the new frequency in its place.
RECALL PRESET RADIO STATIONS
Set the unit to the Tuner mode.
1.)
Repeatedly press the FOLDER/PRESET + or FOLDER/PRESET - buttons to
2.)
recall the preset stations. Stop pressing until the desired preset channel number
appears on the display. The display will show the preset channel number briefly
and then revert to show the frequency of the preset radio station.
3.) Adjust the sound level by pressing the VOLUME+ or VOLUME- buttons. The
Volume Level reading will be displayed for 3 seconds before switching back to
display FM mode information.
4.) To turn off the unit, press
time will display.
once. The display will become dim and the current
10