Download Print this page

Zte MF600 Faq page 6

Advertisement

Voice Related Problems
1. There is No Dial Tone as soon as I lift the phone off the hook
Please wait for 1-2 minutes after the modem is powered ON since the modem will need to
initialize, attach to the network and finally get an IP address from the network.
2. There is a prompt/phone alert/announcement as soon as I lift the phone off the hook
Please make sure the SIM card is the valid SIM provided by Maxis. The line might be barred
or suspended.
3. There is a prompt/phone alert/announcement as soon as I dial the last digit
The dialed number might not be in service or currently suspended. To ensure the number
you called is not facing this problem try to call a similar number.
4. The line is noisy/distorted when I lift the phone off the hook
Remove any electrical appliance which is too close to the phone set or modem. The cable or
phone set might be faulty.
5. Why do I hear a fast engaged tone (Toot...Toot...Toot) as soon as I lift the phone off the hook?
Try to On Hook then Off Hook again to make a call. Make sure you are not surfing the net
during this time.
6. After dialing the last digit I hear nothing/silence?
Please make sure you wait between 4 to 8 seconds before the call is connected or press the
# key after pressing the last digit.
6

Advertisement

loading