E-Mu X Board Control; Definitions - E-Mu X board25 Owner's Manual

E-MU X Board Control

E-MU X BOARD CONTROL
The E-MU X Board Control software allows you to easily edit and then archive X
Board patches on your PC or Mac. All the features of the X Board are logically
displayed on a single page, which makes patch editing a breeze.
X Board Control makes it easy to mix and match your favorite X Board patches,
then save or archive them on your host computer.
In addition, the X Board Control allows you to program several other parameters,
which are not accessible from the X Board keyboard. The additional features are as
follows:
• X Board can send a different program change on any or all MIDI channels
when a new Patch is selected.
• The MIDI channel and CC number are programmable for each of the 16
controller knobs.
• The initial settings for the 16 controller knobs, plus the pitch/mod wheels
and control pedal can be transmitted when a new Patch is selected.
• The CC number for Pitch/Mod Wheels and Control Pedal are programmable.
• Knob controllers and X Board patches can be named with up to 16 characters.
Definitions
Active Buffer
Bank
Patch
Refresh
Store
X Board
The area of memory used by the X Board to hold control settings
before a patch has been stored.
A set of 16 patches representing one complete memory dump
from the X Board.
One complete set of parameters for the X Board.
This function updates the X Board Control application so that it
matches the stored patches in the k X Board. Refresh is not
performed automatically, You must manually Refresh if you have
made edits on the X Board.
The act of writing a patch into the X Board non-volatile memory.
31