Send Prog Change; Aftertouch On/Off; Program Change (Pgm) Browse Mode - E-Mu X board25 Owner's Manual

Basic Operations

Send Prog Change

This function sends MIDI program changes to your external gear on the currently
selected MIDI channel.
To Send an External Program Change
1. Press the Edit button.
2. Press the PC Send keyboard key.
3. Select the desired program change number from 0-127 using the Data Slider
or numeric keyboard keys.
4. Press Enter to send the program change.
5. Press Home to exit without sending the program change.

Aftertouch On/Off

When Aftertouch is On, the keyboard will transmit channel aftertouch messages.
Aftertouch is transmitted when additional pressure is applied to the keyboard after
the keys have been pressed.
Select on to turn Aftertouch on, or oFF to turn it off.

Program Change (PGM) Browse Mode

This function allows you to browse through MIDI programs while playing the
keyboard. Program change messages are sent on the basic MIDI channel.
To Browse MIDI Program Changes
1. Press the Edit button.
2. Press the PGM Browse Mode keyboard key.
3. Select the desired program change number using the Data Slider. The program
change numbers are shown on the LED. You can play the keyboard to listen to
the selected program. (Program change messages are transmitted when the
slider stops moving for one second.)
4. Press Enter or Home to exit Edit mode.
X Board 29