Introduction - GE Profile WPGT9150 Technical Service Manual

Introduction

General
The GE Profi le High-Effi ciency Washer is part of the
GE Profi le Clothes Care system utilizing the latest
developments in washing technology.
The Profi le High-Effi ciency Washer does not
use the typical agitator found on conventional
washers. Instead, the direct drive motor, capable
of spinning at 1,000 rpm, and the 304 stainless
steel wash basket create a centrifugal force that
pulls wash water through fabrics for a thorough
cleaning action. (See )
Operation Overview.
Profi le High-Effi ciency Washers also utilize an
automatic load sensing system to determine load
size and water levels. The washer automatically
fi lls the wash basket with the appropriate amount
of water needed for optimal wash performance.
Other features include:
Auto-Balance Suspension - The washer is
programmed to correct out of balance situations.
(See )
Operation Overview.
Flow-Thru Dispensers - Each of the four
TM
dispensers is timed to release at the right time during the wash cycle. Each reservoir is fl ushed with water to
pre-dilute the product before adding it to the washer. This fl ushing action removes all product to help keep
the compartment clean and free fl owing.
Note: The bleach dispenser fi lls during the main wash to dispense the bleach and refi lls during the rinse
cycle to fl ush any remaining bleach from the reservoir.
Direct Drive Motor - The washer does not use a transmission or mechanical brake. Direct drive technology
results in fewer moving parts for smooth, quiet operation. (See .)
Motor Assembly
Infusor Wash - The washer has specifi c cycles that aid in mixing the detergent/water solution.
TM
– 5 –