Water Tank - GE Profile PFSS6NKW Technical Service Manual

Water Tank

To remove the water tank:
1. Remove the vegetable and fruit drawers shelf.
(See
Vegetable and Fruit Drawers Shelf.)
2. Remove the pantry drawer. (See
3. Remove the 2 Phillips-head screws that attach
the water tank assembly to the back wall of the
refrigerator section.
4. Carefully pull the right side of the tank assembly
approximately 5 inches out from the back wall.
5. Disconnect the water tank heater wire harness.
.)
Pantry Drawer
Disconnect
– 57 –
Note: The water tank heater is attached to the tank
cover with a recessed Phillips-head screw and held
to the water tank by a tab.
6. Remove the Phillips-head screw that attaches
the water tank heater to the cover.
7. Pull out the tank heater to disengage the tab.
Tab
8. Remove the 2 Phillips-head screws that attach
the water tank to the cover.
(Continued next page)