Troubleshooting - JVC KD-DV6404 Instructions Manual

Dvd/cd receiver
Table of Contents

Advertisement

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service center.
• Sound cannot be heard from the speakers.
• The unit does not work at all.
• SSM automatic presetting does not work.
• Static noise while listening to the radio.
• Disc cannot be played back.
• Disc can be neither played back nor ejected.
• Recordable/Rewritable discs cannot be
played back.
• Tracks on the Recordable/Rewritable discs
cannot be skipped.
• Disc cannot be recognized.
• Sound and pictures are sometimes
interrupted or distorted.
• No playback picture (DVD-Video/DivX/MPEG/
VCD) appears on the monitor.
• No picture appears on the monitor at all.
• The monitor shows black and white wavy
pictures (DVD-Video/DivX/MPEG/VCD).
• The left and right edges of the picture are
missing on the monitor.
Symptom
Remedy/Cause
• Adjust the volume to the optimum level.
• Check the cords and connections.
Reset the unit (see page 3).
Store stations manually.
Connect the antenna firmly.
Insert the disc correctly.
• Unlock the disc (see page 11).
• Eject the disc forcibly (see page 3).
• Insert a finalized disc.
• Finalize the discs with the component which you
have used for recording.
Eject the disc forcibly (see page 3).
• Stop playback while driving on rough roads.
• Change the disc.
• Check the cords and connections.
Parking brake wire is not connected properly. (See
Installation/Connection Manual.)
• Connect the video cord correctly.
• Select a correct input on the monitor.
Select an appropriate video format (PAL/NTSC) for your
monitor (see page 25).
Select "4:3 LETTERBOX" (see page 27).
Continued on the next page
REFERENCES
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents