Assembly - Whites Coinmaster GT Owner's Manual

1. Remove all parts from the shipping carton and check assem-
bly diagram to ensure all parts are present.
2. Install black rubber washers on fiber clevis/lower rod, insert
clevis lower rod onto loop ears. Use only nonmetallic wash-
ers, fiber bolt, and fiber thumb nut to secure loop/search coil
to clevis/lower fiber rod.
3. Insert clevis/lower rod into curved "S" rod so that stainless
steel spring clip buttons line up and lock into one of the
adjustment holes in the curved "S" rod. The second or third
adjustment holes are suitable for average sized adults.
4. Wind the loop cable around the rod assembly, first revolu-
tion over the top of the rod, all the way to the top of the
curved "S" rod, about five revolutions. Use the black cable
retainers, one near the loop, and one near the top of the
curved "S" rod, to hold the loop cable in place. Plug the
cable into the jack on the front of the control box.
Coinmaster GT

Assembly

Page 4
Owner's Manual