Page 1
For The ON-THE-GO Pet ™ INSTRUCTION MANUAL SPORTSTER Pet Stroller PG8200 Interior Dimensions: 26L x 12W x 19.5H To see our full line of products, visit us online at: www.petgearinc.com CUSTOMER SERVICE HELP DESK customerservice@petgearinc.com Toll-Free 877-752-9123 - Eastern Standard Time 8am-3pm, Monday through Friday...
Not intended to be used as a restraining device for aggressive or dangerous animals that dig, chew or paw aggressively. Do not leave your pet unattended. PET GEAR is not liable for any damage caused by aggressive, destructive, immature or untrained animals. Do not use near an open or exposed flame.
TO ASSEMBLE FRONT WHEELS Step 1. Turn stroller over as shown. Step 2. Push wheel assembly onto stroller leg until it snaps into place. Note Direction of Arrow NOTE: To remove, squeeze tab and pull wheel off. PG8200 SPORTSTER Pet Stroller...
Page 4
Step 3. Push rear axle onto frame until it clicks and locks into place on both sides. NOTE: Pull down firmly on the brackets to be sure they are securely attached to the stroller’s rear legs. PG8200 SPORTSTER Pet Stroller...
(for easy steering) push tab down. APPLYING THE BRAKES UNLOCK Step 1. Push levers on both rear wheels down to lock. Step 2. Pull levers up to unlock. LOCK WARNING: Never leave your stroller parked without applying brakes. SPORTSTER Pet Stroller PG8200...
• Push stroller back and forth and rotate swivels around to work in lubricant. • Clean the rear wheel assembly and the rest of the frame with warm, soapy water; clean off with warm water and dry thoroughly. • NOTE: Do not lubricate brake components or swivel locks. SPORTSTER Pet Stroller PG8200...
REPLACEMENT PARTS Please have your model number ready before calling. Use only PET GEAR replacement parts. PO Box 99 West Rutland, VT 05777 877-752-9123 www.petgearinc.com SPORTSTER Pet Stroller PG8200...