Page 1
MEG51 5-in-1 Grinder And Strainer Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance. Every effort has been made to ensure the accuracy of this manual. These instructions are not meant to cover every possible condition and situation that may occur.
Common sense, caution and care must be exercised when operating or cleaning tools and equipment. Always contact your dealer, distributor, service agent or manufacturer about problems or conditions you do not understand before operating the product. MEG51 Grinder And Strainer Assembly & Operating Instructions...
Never remove the plug or modify the plug in any way. Do not use adapter plugs with this product. When in use, make sure this product is always plugged into an electrical receptacle with an appropriate breaker switch. MEG51 Grinder And Strainer Assembly & Operating Instructions...
Page 5
REFERENCE. READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. When unpacking, check to make sure all parts listed on page 3 are included. If any parts are missing or broken, please call Customer Service at 1-888-287-6981. MEG51 Grinder And Strainer Assembly & Operating Instructions...
Square Push Tube (E) to gently feed food into the spinning Grater. Do not force food into the hopper. Repeat Steps 1-4 for the Fine Grater and Slicer attachments. Figure 3 MEG51 Grinder And Strainer Assembly & Operating Instructions...
Round Push Tube to gently feed food into the spinning Feed Figure 3 Screw. Do not force food into the hopper. When finished, clean all the parts with warm, soapy water and store. Figure 4 MEG51 Grinder And Strainer Assembly & Operating Instructions...
Before and after use, wash all parts with warm soapy water. Do not use solvents to clean the food surfaces of the machine. Cover the machine with a cloth cover when not in use. 080620 MEG51 Grinder And Strainer Assembl y & Operating Instructions...