Page 1
NOT OPERATE THIS PRODUCT! HAVE QUESTIONS OR PROBLEMS? DO NOT RETURN THIS PRODUCT TO THE RETAILER - CONTACT BUFFALO TOOLS. If you experience a problem or need parts for this product, visit our website http://www.buffalotools.com or call our customer help line at 1-888-287-6981, Monday-Friday, 8 AM - 4 PM Central Time. A copy of the sales receipt is required.
Always contact your dealer, distributor, service agent or manufacturer about problems or conditions you do not understand before operating the product. MBSAW Meat Cutting Band Saw w/Meat Grinder Assembly & Operating Instructions This is a safety alert symbol. It is used to alert you to potential personal injury hazards.
Do not use adapter plugs with this product. When in use, make sure this product is always plugged into a 3-hole electrical receptacle with an appropriate breaker switch. MBSAW Meat Cutting Band Saw w/Meat Grinder Assembly & Operating Instructions...
Page 5
REFERENCE. READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. When unpacking, check to make sure all parts listed on page 12 are included. If any parts are missing or broken, please call Buffalo Tools at 1-888-287-6981. MBSAW Meat Cutting Band Saw w/Meat Grinder Assembly & Operating Instructions...
Drive Wheel in the upper housing. Ignore the holes on top of Part # 95, as they serve no purpose. Once the stand and motor are assembled, attach it to the main body of the saw using three long bolts, through the three elliptical openings (A) in the Upper Cover (Part # 78).
Page 7
Remove the socket screws on the side and back of the Cover (E) (Figure 4). Once removed, the cover will slip up and off, exposing the Drive Wheel and saw blade. Then remove the Blade Guard (F) and Upper Guard Plate (G) (Figure 5).
Page 8
Loosen the socket screw (P) to adjust the bearing (Q) so that it is at least 1/32" away from the blade. (Figure 10) To adjust the saw blade so that it is properly lined up in the cutting channel, first loosen the two socket screws (R). Loosening these screws allows the two small guides (S) to move toward or away from the blade, centering it in the channel.
Page 9
(AA) by hand. (Figure 14) Attaching the Stainless Steel Table Use caution when guiding the table past the saw blade as serious may occur. Wear protective gloves. Remove the four socket screws from the table support as described on Page 7 (Figure 3). Then, from the left front side of the machine, hold the table in both hands and guide it up onto the two table guide wheels (BB) on that side.
Wear protective gloves, clothing and eye protection while operating the Band Saw. Saw blade and grinder knife are sharp! Use care when using and cleaning the product to prevent injury. Dull blades require extra effort, which leads to blade breakage, resulting in flying debris and possible injury to the user or bystanders.
Before and after use, wash all parts with warm soapy water. Do not introduce water into the electric motor through the motor vents. Do not use solvents to wipe off the inside/outside of the Meat Saw & Grinder. Cover the machine with a cloth cover when not in use.