Download Print this page

RBH Sound EP2 Owner's Manual page 3

Advertisement

SELECTING AN EAR CUSHION (continued)
that fits best, creates the best seal and is the most comfortable. If you can
easily hear outside noises when the volume is down or off, you probably don't
have a good seal. To get a better seal and improve the sound, either twist
the cushion in deeper (okay option), change the angle of the earphone in
your ear (decent option), or choose a different size cushion (best option).
INSERTING THE EAR CUSHIONS
Comply™ Foam Tips
1. Roll down or compress the foam cushion into a thin,
round cylinder, see Figure 1.
2. Pull back on ear slightly to open ear canal. Gently insert
the tip into the ear as far down as is comfortable, see
Figure 2.
3. Hold ear cushion in place for approximately 5-10
seconds while the foam expands to create a tight seal,
see Figure 3.
Silicone Cushion
Carefully insert the ear cushion while pulling back on
the ear slightly to open ear canal. Gently insert the tip
into the ear as far down as is comfortable. Outside noise
should almost immediately be blocked out.
Figure 1
Figure 2
Figure 3

Advertisement

loading