Table of Contents
Advertisement
§ Install the Hook Holder on the Coin Tube Holder
as right diagram.
§ According to the denomination of the coin you
will counted, Select the Coin Interior Tube and
Paper Tube. Drop the Coin Interior Tube down
into the Tube Holder.
§ Put the Paper Tube into the Coin interior Tube
and the Paper Tube will be held by the Hook
Holder
§
According to the coin quantity of each paper
tube, set the batch number (in batch counting
mode), then start counting. The machine will
stop when the count total reaches the batch
quantity. All the counted coins will drop into the
Paper Tube, push the Hook Holder backward,
take out the Paper Tube with all counted coins
inside, then seal the open side of the paper tube
manually.
Troubleshooting
▪ Coin Runway Jamming:
When coins are jammed in the coin runway of the machine, rotate the diameter
knob counter-clockwise to release the left guide plate. The jammed coin will fall
into the Rejected Coin Box, and then you can re-adjust the diameter knob again.
High speed coin counting operation instructions
10
Advertisement
Table of Contents
