Epson EB-X92 User Manual page 64

Problem Solving
Moving images are not displayed (moving image sections are black)
Check
Is the computer's image signal being output to the LCD and the
monitor?
Only when projecting images from a laptop computer or a computer
with a built-in LCD screen
Projection stops automatically
Check
Is Sleep Mode set to On?
"Not supported. " is displayed
Check
Is the image signal format setting correct?
Only when projecting images from a video source
Do the image signal Resolution and the Refresh Rate correspond to
the mode?
Only when projecting computer images
"No Signal. " is displayed
Check
Are the cables connected correctly?
Is the correct input port selected?
Is the power for the computer or video source turned on?
Change the image signal to external output only. s Check your computer's documentation.
Press the [t] button to turn on the power. If you do not want to use Sleep Mode, change the setting to Off. s Extended
Menu - Operation - Sleep Mode p.53
Change the setting according to the signal for the connected equipment. s Signal Menu - Video Signal
Refer to the computer's documentation for how to change the image signal Resolution and the Refresh Rate output from
the computer. s "Supported Monitor Displays"
Check that all the cables required for projection are securely connected. s Quick Start Guide
Change the image by pressing the [Source Search] button on the Remote Control or the Control panel. s
Turn the power on for the equipment.
Remedy
Remedy
Remedy
p.90
Remedy
64
p.50
p.22