2. The follow settings are located under the Camera,
Camcorder, and General tabs. The settings that are
displayed will depend on what camera mode you are
in.
Camera:
• Photo size: Select a resolution for photos. Use higher
resolution for higher quality. Higher resolution photos take up
more memory.
• Burst shot: allows several photographs to be captured in quick
succession by touching and holding the Camera button.
• Face detection: allows you to adjust the camera focus based
on face detection technology.
• Metering: allows you to set how the camera measures or
meters the light source: Center-weighted, Matrix, or Spot.
• ISO: determines how sensitive the light meter is on your digital
camera. Choose from Auto, 100, 200, 400, or 800. Use a
lower ISO number to make your camera less sensitive to light, a
higher ISO number to take photos with less light, or Auto to let
the camera automatically adjust the ISO for each of your shots.
• Anti-shake: compensates for camera movement.
95
• Auto night detection: activates or deactivates the night
detection feature.
• Save as: allows you to assign rich tone usage to an image.
Camcorder:
• Video size: Select a resolution for videos. Use higher resolution
for higher quality. Higher resolution videos take up more
memory.
• Video stabilization: Activate or deactivate Optical Image
Stabilization.
Settings:
• Location tag: attach a GPS location tag to the photo. To
improve GPS signals, avoid shooting in locations where the
signal may be obstructed, such as between buildings or in low-
lying areas, or in poor weather conditions. Your location may
appear on your photos when you upload them to the Internet.
To avoid this, deactivate the GPS tag setting.
• Review: set this option if you want to view each picture after
you take it. Select a time value.
• Volume key: assigns a function to the volume key. Choose
from The zoom key, The camera key, or The record key.