Sony DVP-NS710H Operating Instructions Manual page 38

SOD
Displays standard definition
picture with black frame.
HOD
Displays high definition picture
- -
with black frame.
HO
Displays high definition picture
without black frame.
(1920x 1
OaOi)
Displays high definition picture
HOD
with black frame at 1920x 1080
pixels.
(1920x 1
OaOi)
Displays high definition picture
HO
without black frame at
1920x 1080 pixels.
"
• "(l920xl080i) HD 0" and "(l920x1080i) HD"
are effective only when you set "HDMI
RESOLUTION" to "1920x 1080i" and "TV
TYPE" to "16:9."
• If you set this setting to "PhotoTV HD,"
"( 1920x 1080i) HD 0" or "(l920x 1080i) HD,"
effect, rotation, and zoom function are not
available.
• If you want to use effect, rotation, and zoom
function; sets this setting to "SD 0 ," "HD 0 ,"
or "HD."
• If you set this setting to "PhotoTV HD,"
"( 1920x l080i) HD 0" or "( 1920x I080i) HD,"
next image appears after black mute.
• HDMI signal will stop momentarily during
loading or unloading DATA disc or USB (DVP-
NS728H only).
• When you set to "PhotoTV HD," the player
changes video signal output from "HDMI
RESOLUTION" to "1920x 1080i," "TV TYPE"
to "16:9," and "YCBCRIRGB (HDMI)" to
"YCBCR" automatically even though the current
settings are kept.
• Set this setting to "SD 0," when you want to
view photo files in analog video outputs with the
HDMI connection.
• YCBCR/RGB (HDMI)
Selects the type of HOMI signal output from
HOMI OUT jack.
You cannot select this when "PhotoTV HO"
mode is activated (page 30).
• AUDIO (HOMI)
Selects the type of audio signal output from
the HOMI OUT jack.
AUTO
Normally, select this. Outputs
- -
audio signals according to the
"DIGITAL OUT" settings
(page 36).
PCM
Converts Dolby Digital, or 96
kHz/24 bit PCM signals to 48
kHz! 16 bit PCM.
"
A loud noise (or no sound) will be output if you
connect the player to a TV that is not compatible
with DOLBY DIGITAUDTS signals and "AUTO"
is selected. In this case, select "PCM."
• CONTROL FOR HOMI
Switches the Control For HOMI setting
on or off.
ON Allows you to use the
-
CONTROL FOR HDMI
features (page 12).
OFF Switches this function off.
• LANGUAGE FOLLOW
Switches the languages of the OVO player
to the same as the current TV OSO
language.
You cannot select this when "CONTROL
FOR HOMI" is set to "OFF."
ON Switches this function on.
OFF Switches this function off.
"
• Turn off any display before using this function.
• The OSD language for player keeps if the TV's
language cannot be supported.
YCSCR
RGB
Outputs YCBCR signals.
Outputs RGB signals.
"
• If the playback picture becomes distorted, set this
setting to "RGB."
• If the HDMI OUT jack is connected to equipment
with a DVI jack, "RGB" signals will be
automatically output even when you select
"YCBCR."