Panasonic CT-30WX52 Operating Instructions Manual page 8

I
Cable Connection
Connecting the Aerial cable to the RF In Terminal
l
For proper reception of VHF/UHF channels, an external antenna is required. For best reception, an outdoor antenna is
recommended. Antenna Mode must be set to TV.
l
Incoming Cable from Home Antenna
Connect home antenna to ANTI connection on back of television. Select TV mode and ANT1 in the SET UP menu.
( Cable Mode is preset at the factory. Antenna users must change to TV mode and select ANT1 in the Set Up Menu
under Prog than.)
VHF Aerial UHF Aerial
Mixer
'Y f
75 Ohm
Coaxial Cable
COMPONENT VIDEO INPUT INPUT
I
1 '1' 2 1 3
Incoming Cable from
Incoming Cable from
Home Antenna Cable Company
Note: Certain cable systems offset some channels to reduce interference or have
Premium (scrambled) channels. A cable converter box is required for proper
reception. Check with your local Cable company for its compatibility
requirements.
Notes:
(1) To obtain optimum quality picture and sound, an Aerial, the correct cable (75 Ohm coaxial) and the correct terminating
plug are required.
(2) If a communal Aerial system is used, you may require the correct connection cable and plug between the wall Aerial
socket and your television receiver.
(3) Your local Television Service Centre or Dealer may be able to assist you in obtaining the correct Aerial system for your
particular area and the accessories required.
(4) Any matters regarding Aerial installation, upgrading of existing systems or accessories required, and the costs incurred,
are the responsibility of you, the Customer.
8