Panasonic CT-30WX52 Operating Instructions Manual page 46

I
ASPECT Controls
The color monitor will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format
picture.
ASPECT ASPECT button
0
The aspect mode changes each time the ASPECT button is pressed.
4 : 3 + ZOOM + FULL * JUST
1
Notes:
(1) For a 480~ signal input during component input signal mode, the
mode will change as follows:
r
FULL + 4 : 3 __+ ZOOM
I
1
1
(2) When a 108Oi signal is being received, the mode is set to FULL, and
aspect switching is not possible.
(3) During PIP operation, ASPECT Controls are available only in the
main picture according to the receiving signal of the main picture.
(4) During SPLIT Screen ASPECT Controls are not available.
4 : 3 will display a 4:3 picture at its standard 4:3 size.
ZOOM mode magnifies the central section of the
picture.
FULL will display the picture at its maximum size but
with sight elongation.
JUST mode will display a 4:3 picture at its maximum
size but with aspect correction applied to the sides
of the screen so that elongation is only apparent at
the left and right edges of the screen. The size of the
picture will depend on the original signal.
Notes:
(1) The S-VIDEO terminal on this set can detect specially encoded signals that are compatible with a wide screen monitor.
When a full image from the S-VIDEO terminal of specially encoded video is detected by the set, the screen size is
automatically set to FULL mode.
(2) The screen size also changes if ID-l is detected.
(3) The screen size will also change if Sl detection has been set.
46