Advertisement
5. To verify if the device exists in your system,
go to Start
Hardware
the device is listed. If not, contact your dealer
for technical support.
Installation for Windows NT
1. Before you start Windows NT, make sure
the PCMCIA Fax Modem 56K PC Card has
been properly inserted into the free
PCMCIA slot of your computer.
2. Load the device driver compact disk in the
CD-ROM drive.
3. Start Windows NT.
4. Go to My Computer.
5. Click the CD-ROM drive. Click the
driver\winnt folder. Or you may click the
Browse button to select the CD-ROM drive
and the driver\winnt folder.
6. Double-click setup.exe. The installation
program will proceed automatically.
Note: If Softex or Card Wizard was already
installed in your system, Windows will appear
message for PC Card malfunctioning. Ignore
this message and install the WinNT driver.
Remember to reboot after the installation.
Control Panel
Device Manager. Check if
- 12 -
System
Advertisement
