1. Manuals
  2. Brands
  3. Belshaw Brothers Manuals
  4. Kitchen Appliances
  5. Type B
  6. Operator's manual

Belshaw Brothers Type B Operator's Manual

Donut cutter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Donut Cutter
Type B
Operator's Manual
Belshaw Bros., Inc.
th
814 44
Street NW, Suite 103
Auburn, WA 98001 USA
Phone: (206) 322-5474 • Fax: (206) 322-5425
Email: service@belshaw.com • http://www.belshaw.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Type B and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Belshaw Brothers Type B

Summary of Contents for Belshaw Brothers Type B

  • Page 1 Donut Cutter Type B Operator’s Manual Belshaw Bros., Inc. 814 44 Street NW, Suite 103 Auburn, WA 98001 USA Phone: (206) 322-5474 • Fax: (206) 322-5425 Email: service@belshaw.com • http://www.belshaw.com...
  • Page 2 If you accept the machine from the shipping company, you are, in effect, saying that the machine is in good condition, and you must pay for the machine. The freight company has accepted responsibility for the safe delivery of our machines. For your protection, inspect the machine to see that no parts are bent, scratched, or otherwise damaged.

  • Page 3: Table Of Contents

    Care, Maintenance & Cleaning Instructions for Plungers, Cylinders & Hoppers Donut-Making Helps Tips on Making Quality Cake Donuts Calculating Correct Water Temperature Ratios of Plunger Sizes to Donut Weights Temperature Conversion Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 Type B Donut Cutter OM MN-1527EN...
  • Page 4 Preface The Type B Donut Cutter is designed to cut cake WARNING donut products and deposit them in a variety of fryers. It is designed to be mounted on a wall or Never put your hand in the hopper or on a column attached to the fryer.
  • Page 5 (this dough can then be replaced in the Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 Type B Donut Cutter OM MN-1527EN...

  • Page 6: Cleaning

    CAUTION Never put your hand in the hopper or between trip arms while cutter is being cranked. Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 MN-1527EN Type B Donut Cutter OM...

  • Page 7: Maintenance

    Plungers and cylinders should be covered with a thin film of cooking oil. This provides protection and lubrication for the plungers and cylinders. Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 Type B Donut Cutter OM MN-1527EN...
  • Page 8 Reassemble the plunger. Be certain that the bottom piston is threaded into place completely. Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 MN-1527EN Type B Donut Cutter OM...

  • Page 9: Donut-Making Helps

    The donuts may also become dense inside. Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 Type B Donut Cutter OM MN-1527EN...

  • Page 10: Calculating Correct Water Temperature

    16-20 oz/454-567 g 21.2 179.4 1 7/8” 19-24 oz/539-680 g 23.9 182.2 2" 22-27 oz/624-765 g 26.7 185.0 162.8 187.8 165.6 190.6 168.3 193.3 Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 MN-1527EN Type B Donut Cutter OM...
  • Page 11 Donut Cutter Type B Technical Supplement Belshaw Bros., Inc. 814 44 Street NW, Suite 103 Auburn, WA 98001 USA Phone: (206) 322-5474 • Fax: (206) 322-5425 Email: service@belshaw.com • http://www.belshaw.com...
  • Page 13 If you accept the machine from the shipping company, you are, in effect, saying that the machine is in good condition, and you must pay for the machine. The freight company has accepted responsibility for the safe delivery of our machines. For your protection, inspect the machine to see that no parts are bent, scratched, or otherwise damaged.
  • Page 15 Service Bulletin #18 (Trip Arm Adjustment) Service Bulletin #88 (#400 Height Adjustment Kit Instructions) Parts Info Appendix Parts List Drawing Insert Page Insert Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 Type B Donut Cutter TS MN-1528EN...
  • Page 16 Preface The Type B Donut Cutter is designed to cut cake WARNING donut products and deposit them in a variety of fryers. It is designed to be mounted on a wall or Never put your hand in the hopper or on a column attached to the fryer.

  • Page 17: Installation

    (pin side down); then slide the bushing through the hole in the other leg of the straight arm. Position the bushing between the hinge Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 Type B Donut Cutter TS MN-1528EN...

  • Page 18: Column Mount

    7. The cutter frame can now be mounted on IMPORTANT: A 618L-0104 extension the pin at the end of the pivot arm. limiting bracket is designed to help keep the Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 MN-1528EN Type B Donut Cutter TS...
  • Page 19 5. Use the holes in the mounting brackets as the pin at the end of the pivot arm. guides for drilling 5/16” holes in the fryer cabinet. Secure the mounting brackets Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 Type B Donut Cutter TS MN-1528EN...

  • Page 20: Maintenance

    Plungers and cylinders should be covered with a thin film of cooking oil. This provides protection and lubrication for the plungers and cylinders. Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 MN-1528EN Type B Donut Cutter TS...

  • Page 21: Troubleshooting

    FREIGHT PREPAID, with your instructions, phone number, and the name of the person to contact when a cost estimate has been determined. In Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 Type B Donut Cutter TS MN-1528EN...
  • Page 22 Adjust trip arm spacing. See SB-17 in Appendix. Upper and lower pistons straddling Adjust trip arm spacing. See SB-17 in cylinder. Appendix. Dodge (drive) pin slipping. Tighten brake bands. Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 MN-1528EN Type B Donut Cutter TS...
  • Page 23 Adjust trip arm spacing. See SB-17 in Appendix. Improper mixing. Check mixing procedure. Mix temperature too high. Lower mix temperature to match manufacturer’s specifications. Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 Type B Donut Cutter TS MN-1528EN...
  • Page 24 Gibs 7B-0013 sheared off. Replace 7B-0013 gibs. (Order correct size: 7B-0013A gibs for sizes 1 1/8” and 1 ¼”; 7B-0013 for sizes 1 3/8 to 2”. Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 MN-1528EN Type B Donut Cutter TS...
  • Page 25 7a. Former 7B-1002 flutes plugged. 7a. Disassembly plunger, clean former and reassemble. 7b. Trip arm bent. 7b. Adjust trip arm spacing. See SB-17 in Appendix. Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 Type B Donut Cutter TS MN-1528EN...
  • Page 26 Tap lightly with a soft hammer to loosen. KRINKLE PLUNGER – IRREGULAR PRODUCT Possible Causes What To Do Former flutes plugged. Disassemble and clean. Reassemble. Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 MN-1528EN Type B Donut Cutter TS...

  • Page 27: Plungers, Mounting Info

    Service Bulletin #254B (Extension Arm Limiting Bracket Installation Instructions) Insert Service Bulletin #18 (Trip Arm Adjustment) Insert Service Bulletin #88 (#400 Height Adjustment Kit Instructions) Insert Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 Type B Donut Cutter TS MN-1528EN...
  • Page 28 French plunger should be returned to the factory. #7B-1001 French Plunger Sizes: 1-1/8”, 1-1/4”, 1-3/8”, 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8”, 2”, 2-1/8”, 2-1/4” Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 MN-1528EN Type B Donut Cutter TS...
  • Page 29 Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 Type B Donut Cutter TS MN-1528EN...
  • Page 30 Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 MN-1528EN Type B Donut Cutter...
  • Page 31 Check dimension “D.” If either “C” or “D” is not correct, parts may be worn and should be replaced. SB-18 Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 Type B Donut Cutter TS MN-1528EN...
  • Page 32 3. Raise the height adjustment assembly (A, B, C and D) to achieve a distance of 1 3/8” between the Bottom of “C” and the arm bracket. Tighten set screw “D”. SB-88 Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 MN-1528EN Type B Donut Cutter TS...

  • Page 33: Parts Info

    Parts Info Drawings and Parts Lists in this section are for reference only. See the Parts List Drawing Insert for part numbers. Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 Type B Donut Cutter TS MN-1528EN...
  • Page 34 Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 MN-1528EN Type B Donut Cutter TS...

  • Page 35: Appendix

    Appendix See Parts List Drawing Insert Page. Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 Type B Donut Cutter TS MN-1528EN...

  • Page 37: Parts List Drawing Insert Page

    B0001000 R02 Parts List Drawing Insert Page Title: B Cake Donut Cutters Model: Item Number: B0001000 B-LB-W/O Final Assembly Drawing: B0001000 Final Assy BOM Only Sub Assemblies: 0226CHS B-LB-W/O-X without plgr/cyl/hpr 0324B Type “B” Frame Assembly OPTIONAL MOUNTING KITS Wall Mount: 0406 Wall Mt Brkt Kit (See Technical Supplement-Page 18) Column Mount: 0405 B Column Mounting Kit (See Technical Supplement-Page 18)
  • Page 43 Belshaw Adamatic Bakery Group Limited Warranty / Return Policy Belshaw Adamatic Bakery Group (also referred to herein as “the Manufacturer”) warrants parts of its manufacture and assembly of equipment to be free from defects in workmanship and material which would result in product failure under normal use and service. Belshaw Adamatic Bakery Group’s entire liability under this Warranty is limited to either repairing or replacing at its factory or;...
  • Page 44 Limited Warranty With respect to parts not manufactured by Belshaw Adamatic Bakery Group, warranty coverage shall be limited to the original part manufacturer’s warranty, or the Belshaw Adamatic Bakery Group Limited Warranty, whichever is the lesser coverage period. In no case will the warranty be in excess of 18 months after date of shipment of the equipment.

Table of Contents