Use Call Waiting; Make A Conference Call - Nokia 3586 User Manual

En3586.book Page 54 Wednesday, April 30, 2003 7:05 PM
Advanced features
4 Enter the number to which you want
your calls forwarded (or press Search
to recall a number from the phone
book), and press OK.
5 Press Your phone calls the network to
activate (or cancel) the feature you've
requested. The network sends a
confirmation note when the feature
has been activated (or cancelled)
successfully.

• USE CALL WAITING

This network service lets you receive an
incoming call when you're already in a
call. When you receive an incoming call,
your phone displays the caller's phone
number (or the caller's entry in your
phone book). The phone also beeps,
notifying you of the incoming call.
Answering a waiting call
Press the Send key (or press Answer) to
place the current active call on hold
automatically and answer the new call.
Switch between the two calls
Accepting the waiting call puts the your
first caller on hold. To put the second
caller on hold and reconnect with the
first caller, press the Send key.
End the active call
To end the active call, simply allow the
other party to hang up; the call on hold
then becomes the active call. OR:
1
Press the End key to terminate the
active call.
2 The network redials your phone with
the call on hold. Answer this as you
would any normal incoming call.
• MAKE A CONFERENCE
CALL
This feature allows you to talk to two
people at the same time. Conference
calling is a network-dependent feature.
Note: Check with your service
provider to make sure this service
is available in your network.
1
Make a call to the first participant as
usual. When you're ready to place a
call to the next party,
2 Press Options, then press New call.
3 Enter the number and press the Send
key (or press Search to recall the
number from the phone book).
4 Press the Send key again to connect
both parties.
5 To end the call, press the End key. This
action disconnects both parties.
End calls
To end a conference call (disconnect with
all callers), press the End key. Or you can
also press Options, then select End all
calls.
Disconnect second party
While all three parties are connected,
pressing the Send key disconnects the
second caller, keeping the first party's
call active.
Disconnect first party
If you wish to disconnect with the first
party and remain connected to the
second party, have the first party
terminate the call on his/her end.
[ 54 ]