Table of Contents
Advertisement
En3586.book Page 51 Wednesday, April 30, 2003 7:05 PM
Use a voice command
Warning! Do not use voice
command in an emergency
situation. In emergencies, stress
causes changes in your voice,
which may keep the phone from
recognizing your voice command.
1
At the Start screen, press and hold
Names for one to two seconds. A tone is
heard and Please speak now is
displayed.
2
After the tone, clearly speak the voice
tag that you recorded previously into
the microphone.
The only other option for initiating a
voice command is to press the headset
button momentarily at the Start screen.
The alert tones plays through the
headset.
Speak the voice tag into the headset
microphone. The voice tag will playback
through the headset to confirm your
choice.
Work with voice tags
You can listen to an existing voice tag (in
case you forgot what you recorded), re-
record a voice tag, or delete an existing
tag.
1
Press Menu 8-2 (Voice > Voice
commands).
2
Scroll to the menu option you wish to
tag, then press Select.
3
Press Options, scroll to either
Playback, Change, or Delete, and press
Select.
Note: If you chose Change, press
Start to record again. The new
tag that is recorded replaces the
old information.
[ 51 ]
Personalization
Advertisement
Table of Contents
