Suzuki Designer FP-S Owner's Manual page 21

PANEL CONTROLS
GRAND PIANO
REVERB
EFFECTS
CURSER
SCREEN
LEFT RIGHT
ESCAPE
28
28. SCREEN LEFT, SCREEN RIGHT - The SCREEN buttons are available
for use when there is more information than can be viewed on the LCD
Display Screen. If your selected feature or function has additional LCD
Display Screen information the Screen Left and/or Screen Right LED
buttons will lit up. If an indicator light is on then there is additional
screen information available for the selected function.
Use the SCREEN LEFT or SCREEN RIGHT buttons to access the
additional menu pages that you want to view.
29. VALUE - Use the VALUE + and - buttons to adjust levels on the
currently selected feature.
These buttons auto repeat when they are held down, therefore they will
continue to cycle upward or downward until the button is released.
Note: The default factory setting of the selected parameter can be
recalled by pressing down both the VALUE + and - buttons at the
same time.
30. ENTER - Use the Enter button to select the highlighted function or
feature on the LCD Display Screen of the piano. This will engage your
selected highlighted item.
31. CONTRAST KNOB - Use the contrast knob to adjust the brightness
and contrast of the display screen.
32. VALUE WHEEL - Use the value wheel to change the function param-
eters or levels of the selected item or it's highlighted feature. It has
the same function as the Value + or - buttons.
To increase the value turn the wheel clockwise, to decrease the value
turn the wheel counterclockwise.
VALUE ENTER
– +
29 30
DATA WHEEL
32
CONTRAST
31
21