Special Configuration; Accessories / Components; Inspection And Service; Cleaning - Cedes Safe2+ Operation Manual

Safe2+ / Safe4

8.3. Special configuration

All Safe2+ or Safe4 light curtains mentioned above
are also available with separated controllers or with
extension modules Naturally, all these versions are
provided with integrated self-monitoring and if re-
quired they also can be operate with external test,.
An extensive overview of all the possibilities that the
modularity of the Safe2+ or Safe4 systems offer are
shown in the "Configuration Tool" software. This
program can be obtained from any of your CEDES
partners and is also available from the CEDES
Homepage at www.cedes.com.
Your nearest CEDES sales office gives professional
support for the evaluation of a special configuration.
Due to safety reasons the special configuration has
to be assembled and tested at the manufacturing
site. You will receive a completed and tested system
with all safety relevant information on the type label
ready for installation.
Standard configuration
System with separated controller
Two separated protective fields
Two separated protective fields with separated controller
Three separated protective fields
Two separated protective fields by a passive zone
(Perimeter, static blanking)
Figure 24: Possible configurations
For further information, dimensional drawings in
different file formats are available on our CEDES
homepage.
An accessory which shows clearly the whole flexibil-
ity and great variety of the Safe2+ or Safe4 family is
a computer program named "Configuration Tool with
OptiLink".
The user defines with the help of an easy working
graphical editor the configuration:
1. Length and number of protective fields
2. Resolution
3. Connecting type (cable gland or M12/5 pin)
4. Length of the connection cables
5. System with or without ILAS
6. Safety category 2 or 4
20
The results given to the user are the
• exact designation of system for a clear identify-
ing of the customer design,
• response time and
• safety distance.
All data in the software "Configuration Tool" with
regards to safety, is checked and certified by TÜV
Rheinland. Calculations of the safety distances can
be printed out and become a part of the safety
evaluation documentation for the corresponding
application.

8.4. Accessories / Components

Table 5
CEDES
Part No.
106 427
102 862
106 429
301 347
102 792
102 793
106 500
106 502
106 503
106 497
106 501
103 006
103 652
102 965
103 282
104 565
103 105
104 794
Edges up to a length of 1800mm are fixed using two
brackets. Longer edges with 3 brackets.
9.
All light curtains contain only electronics and there-
fore need no preventive maintenance.

9.1. Cleaning

The optical windows are to be cleaned with non-
aggressive materials only. The interval between
cleaning is dependant on the air pollution at the
installation.
Do not use aggressive solvents or abrasive sub-
stances. Otherwise range reduction and false
switching could arise
www.cedes.com
Operation Manual
Description
Connection Cap A (Cable Gland) Tx / Rx
Connection Cap B (M12/5 Pin) Tx / Rx
Connection Cap C (Double M12/5 Pin) Tx
Cable, 5m, M12-M12, 5pol, M-F
Cable, 1m, MiniDin-MiniDin, 8pol, M-F
Cable, 3m, MiniDin-MiniDin, 8pol, M-F
Mounting kit 30mm (2 brackets)
Mounting kit vertical 30mm (2 brackets)
Mounting kit FGS 30mm (2 brackets)
Mounting kit 180° adj. 30mm (2 brackets)
Mounting kit silent block (2 pcs.)
Mirror 30
Mirror 60 with mounting column
ZCH Drawing opto edges Safe4/Safe2+
CD Configuration Tool / Optilink
OptiLink USB
Safety relay SafeC S
Safety relay SafeCIS3-2P-4IO

Inspection and service

© CEDES Safety & Automation AG / June 2008