Waring MG105 Instruction Book page 8

ASSEMbLING ThE WARING PRO
MEAT GRINDER TO MAkE SAUSAGES
Grinder/feeder head
1. Attach grinder/feeder head to
motor housing.
Cutting blade
3. Assemble cutting blade on
the end of the feed screw.
Sausage attachment
Screwing ring
5. Put the desired sausage
attachment (small or large)
into the screwing ring and
screw onto the grinder/feeder
head.
Feed screw
Motor housing
Coarse cutting
Grinder/feeder head
7
®
2. Insert feed screw into the
grinder/feeder head.
plate
4. Place the coarse cutting plate
in the grinder/feeder head.
Die-cast
hopper
Sausage
attachment
Casing
6. Slide casing over the end of the
sausage attachment, leaving
approximately 2" overhanging the
end of the sausage attachment.
Grinder/feeder head
Grinder/feeder head
Pusher