Using The Remote Control Remote Control Description - Sony Trinitron KV-27FV310 Service Manual

Using the Remote Control
Remote Control Description
A
B
C
D
E
F
G
H
/
I
J
K
Button
1 MUTING
2 SYSTEM OFF
L
3 TV/VCR
M
N
O
4 ANT
P
(antenna)
Q
5
PICTURE MODE
R
6 SLEEP
S
T
7 JUMP
U
V
8 TV/SAT
9 RESET
q; VOL (volume)
qa
CODE SET
Description
Press to turn off the sound. Press again or press
to restore sound.
Press to turn off the equipment programmed into
the remote control. See "Programming the Remote
Control" on page 5.
Press to switch between TV and VCR mode. If you
have a non-Sony VCR, you will need to program
the remote control to recognize your VCR. For
details; see "Programming the Remote Control" on
page 5.
Press to switch between VHF/UHF input to the
AUX input.
Press repeatedly to step through the available video
picture modes: Vivid, Standard, Movie and Pro.
Also available in the Video menu. See "Using the
Video Menu" on page 30 for details.
Press repeatedly until the TV displays the time in
minutes (15, 30, 45, 60, or 90) that you want the TV
to remain on before shutting off automatically.
Cancel by pressing until Sleep Off appears. While
the Sleep feature is set, press once to view the
remaining time.
Press to jump back and forth between two channels.
The TV alternates between the current channel and
the last channel that you selected. JUMP will not
work if any FUNCTION Mode (VCR/DVD, SAT/
CABLE, TV) is activated.
Press to switch between the TV and SAT (satellite)
inputs when in SAT FUNCTION mode.
Press for a direct selection of Effect settings
(Simulated, WOW, TruSurround, Off) when the
remote is in TV FUNCTION mode.
See "Using the Audio Menu" on page 31 for details.
Press to return to factory settings while in an
on-screen menu.
Press (+) or (-) to adjust the volume.
Press to program your remote control to operate
connected video equipment. See "Programming the
Remote Control" on page 5.
3