Displaying Tv Status Information - Toshiba 23L1400UC User Manual

YUV, Chroma Format). When the HDMI Information is set to
Off, the normal banner is displayed.

Displaying TV status information

To display TV status information using the RECALL button:
Press the RECALL button on the remote control.
v
The following information will be displayed (if applicable):
Current input (ANT/CABLE, Video, etc.)
v
If ANT/CABLE is the current input, either "CABLE" (for cable
v
TV) or "ANT" (for over-the-air broadcasts).
Channel number (if in ANT/CABLE mode)
v
Digital signal strength indicator (bar graph in lower right
v
corner of box; for digital signals only)
Stereo, Mono, or SAP audio status (when in HDMI
v
mode, Dolby
Video resolution
v
Aspect ratio of incoming video signal (4:3 or 16:9)
v
V-Chip rating status
v
GameTimer (if set)
v
To close the Recall screen, press the RECALL button again.
To display TV status information using INFO, press the INFO
button.
The following additional information will display for digital
channels, if applicable:
Title
v
Duration
v
v The signal information banner will appear when this feature is set
to On and you watch an HDMI
button. The signal information will disappear after approximately
60 seconds.
v If you press the INFO button when this feature is set to Off, only
the normal banner will appear.
Digital, or PCM)
®
Setting up your TV
Displaying TV status information
input and press the INFO
®
89
input
®