Audio Only Mode - JVC BlackCrystal JLC-32BC3000 User Manual

Audio Only Mode

The TV supports music playback from external
music players, such as an MP4 or iPod. While
playing music, you can set the TV to Audio Only
mode to turn off the TV display and save power.
1
Connect one end of an audio cable to the
Music/PC Audio IN port of the TV, then
connect the other end to the Audio OUT
port of the music player.
TV Rear
RGB PC
Audio IN
RGB PC AUDIO
3.5mm audio cable
2
Press MUSIC. The Music screen is
displayed. Music playback from the music
player is heard through the TV speakers.
3
Press AUDIO to activate Audio Only
mode. A message appears on the screen,
then after a few seconds, the TV display
turns off.
4
Press any button to turn on the display and
exit Audio Only mode.
Note: Only the sound comes out from the TV speakers,
all playback controls are managed through the music
player.
Music player
Audio OUT
Earphone
Basic Operations
19