Advertisement
Diffuser and Deflector Installation
A diffuser and deflector are
included with the housing. The
diffuser is white transparent
plastic. The deflector is also
white but is not transparent.
To install the diffuser or
deflector, push the "Cut-out"
Section into the
diffuser/deflector port groove
until it stops.
Note the Small Hole. To avoid
losing the diffuser/deflector, you can attach
a fishing line or string to this hole.
Flash Deflector
Once installed into the outer diffuser/deflector port groove, the
deflector will deflect the camera flash when using an EV Manual
Controller. The deflector will redirect the camera's flash to the EV
Controller which controls the external strobe output. Remove the
diffuser before attempting to install the deflector.
Using Ikelite DS Digital Strobes
Ikelite DS series Substrobes are industry favorites for their warm,
even coverage and lightning fast recycle time. Being farther from
the camera lens, the optional DS Substrobe aids in reducing the
illumination of particles in the water and helps to eliminate
backscatter. When used in conjunction with the EV-Controller, the
DS51Mode switch is set to the TTL setting and the EV-Controller
provides ten power settings in half-stop increments.
Using Strobes (cont.)
DS161(cont.)
The DS1 61 flash covers
the equivalent of an
1 8mm lens or 1 00
degrees w/diffuser
installed. It is the ideal
choice when using
wide angle lenses
greater than 80 degrees.
It also features a 1 .5
second recycle time and
225 flashes per full
charge.
SA-100 Ball/Socket Arm
The SA-1 00 system #4086.61
with it's 1 " diameter ball is
ideal underwater. The #9571 .3
extended stem mount allows
easy attachment of the EV
controller or flashlight mount,
and drops right into the release
handle. The arm system allows
easy strobe placement from
macro close-up to wide angle.
The complete system removes
with a push of the handle
button.
Lens Port
9
Batt
w/Li t e
DS161 Movie Substrobe
11
Using Strobes (cont.)
AF35 Strobe Package #4035
The AutoFlash AF35 kit is a great
compliment, and an effortless, affordable
way to add a flash to your new Ikelite
point-and-shoot camera system. Everything
you need to get started is in the box. Just
attach it to the bottom of your housing and
start taking pictures!
AF35 AutoFlash kit includes:
AF35 strobe - Flex arm - AutoFlash sensor
Handle with rubber grip - Tray (single or
dual) - Mounting hardware.
Substrobe DS51
The Substrobe DS51covers the equivalent of a 28mm lens. It is the
ideal choice when using only the camera lens with no accessory
wide angle lenses attached.
ikelite
DS161Movie Substrobe
The DS1 61Movie Substrobe combines all of the functionality of our
renowned DS1 60 with a powerful 500 lumen LED video light.
Three super-bright LEDs are arranged behind a special optical
element to provide a 45 degree angle of coverage free of hotspots.
Using Strobes (cont.)
Recommended Strobe Packages
Substrobe AF35 AutoFlash Kit #4035 includes Single Tray.
Substrobe AF35 AutoFlash Kit #4035.1includes Dual Tray.
Substrobe DS-51 Package #3944.54 includes #4086.61Arm System
with EV Manual Controller.
Substrobe DS-160 Package #3944.91includes #4086.61Arm
System and 1 .5 hour Smart Charger with EV Manual Controller.
Substrobe DS-161Package #3945.03 includes #4086.61Arm System
and 1 .5 hour Smart Charger with EV Manual Controller.
Please Read If Using an EV-Controller
The EV-Controller used with Ikelite
DS Substrobes has two user
settings. One setting is for strobe
selection, the other is for
pre-flash "P" or non pre-flash "P".
This camera uses pre-flash, (except
in manual mode), thus the
EV-Controller should be set to the
pre-flash "P" position when used
with this camera as a slave. If
manual mode is desired, set the
EV-controller to the non-pre-flash
"P" position.
10
12
Advertisement
