Software Upgrade - Samsung HW-E550 User Manual

POWER
TV POWER
POWER TV POWER
SAT
SOURCE SOUND SPEAKER
EFFECT
SAT MUTE SMART 3D SOUND
VOLUME
SAT
SOUND SPEAKER
SOURCE
VOLUME S/W LEVEL AUDIO SYNC
EFFECT
REPEAT DRC DIMMER AUTO POWER
SAT MUTE SMART 3D SOUND
TV SOURCE TV INFO
VOLUME
TV CH
TV VOL TV TV VOL
MUTE
TV CH
TV PRE-CH TV EXIT
VOLUME S/W LEVEL AUDIO SYNC
POWER
TV POWER
REPEAT DRC DIMMER AUTO POWER
SAT
SOURCE SOUND SPEAKER
EFFECT
SAT MUTE SMART 3D SOUND
TV SOURCE TV INFO
VOLUME
TV CH
VOLUME S/W LEVEL AUDIO SYNC
TV
TV VOL TV VOL
MUTE
REPEAT DRC DIMMER AUTO POWER
TV CH
POWER TV POWER
TV PRE-CH TV EXIT
SAT
SOURCE SOUND SPEAKER
EFFECT
SAT MUTE SMART 3D SOUND TV SOURCE TV INFO
VOLUME
TV CH
VOLUME S/W LEVEL AUDIO SYNC
REPEAT DRC DIMMER AUTO POWER
TV
TV VOL TV VOL
TV SOURCE TV INFO
TV CH
MUTE
TV VOL TV TV VOL
MUTE
TV CH
TV PRE-CH TV EXIT
TV CH
TV PRE-CH
TV EXIT

SOFTWARE UPGRADE

Samsung may offer upgrades for the Crystal Surround Air Track's system
firmware in the future.
If an upgrade is offered, you can upgrade the firmware by connecting a USB
drive with the firmware upgrade stored on it to the USB port on your Air Track.
Note that if there are multiple upgrade files, you must load them onto the USB drive
singly and use them to upgrade the firmware one at a time.
Please visit Samsung.com or contact the Samsung call center to receive more
information about downloading upgrades files.
▪
Insert a USB drive containing the firmware upgrade into the USB port on the back of the subwoofer.
▪
Please be careful to not disconnect the power or remove the USB drive while upgrades are being
applied. The main unit will turn off automatically after completing the firmware upgrade.
When software is upgraded, settings you have made will return to their default (factory) settings.
We recommend you write down your settings so that you can easily reset them after the upgrade.
▪
If the firnware fails to upgrade, we recommend formatting the USB data in FAT16 and trying again.
▪
For upgrading purposes, do not format USB drive in NTFS format because it is not a supported file system.
▪
Depending on the manufacturer, the USB may not be supported.
SPEAKER button
This button enables you to select between listening to audio from your
TV or audio from the Air Track when connected via HDMI.
Press SPEAKER on the remote control of this unit.
AUDIO MODE SPEAKER
TV
HDMI IN
Air Track
TV
ARC
Air Track
Using the TV functions
1. Press TV SOURCE on the remote control of AirTrack.
2. Press TV INFO on the remote control to display the TV channel
information.
3. Press TV CH on the remote control to select the TV channel.
4. Press TV VOL on the remote control to increase or decrease the volume
level.
5. Use TV PRE-CH button to move to the previous TV channel in TV
mode.
6. To exit the TV menu, use the TV EXIT button. (Functions same as the
EXIT button of the TV remote control)
▪
The remote control can operate TVs made by SAMSUNG only.
Scroll Display Display
TV SPEAKER TV SPK
AVR SPEAKER HDMI 1,2
TV SPEAKER S MUTE
AVR SPEAKER TV ARC
ON
OFF
DIGITAL
AUDIO IN
ID SET (OPTICAL) AUX IN
HDMI IN 1 HDMI IN 2 HDMI OUT
ON
OFF
DIGITAL
AUDIO IN
(OPTICAL)
ID SET AUX IN
HDMI IN 1 HDMI IN 2 HDMI OUT
U S B
U S B
27